Cold forming

冷成形加工XAR400耐磨鋼板折彎加工和卷圓加工

 The products made of this steel are suitable for cold bending provided, that consideration is given to the high hardness. The formability of steel decreases with increasing hardness. This has to be kept in mind when forming. The forming must take place at a slow and steady rate, the cut edges must be deburred and the plates heated, if necessary, prior to the forming. A final stress-relieving is not necessary for this steel.

XAR400耐磨鋼板這種材料適合冷成形加工，冷成型加工包括耐磨板折彎加工，耐磨板卷圓加工和耐磨油壓成型。 但是必須注意這個材料很高的硬度。 隨著硬度的提高材料的塑性隨之降低，在成形加工時必須考慮這點。成形加工必須以緩慢地、穩步地速度，切割銳角和毛刺必須清除干凈，如果有必要，XAR400耐磨鋼板在成形加工之前要預熱。

如果在加工過程中遇到困難可以咨詢上海志琪實業有限公司的相關銷售人員。

上海志琪竭誠為您服務。

http://www.feigekeji.com.cn/show_news.asp?s_id=1417