Thermal cutting

XAR400耐磨鋼板火焰切割加工

 Preferably the flame-cutting process is used. For small product thicknesses, however, the plasma cutting process is used in the interest of minimum distortion.

Preheating is not normally necessary when flame-cutting thicknesses up to around 30 mm (1.181 in.). However, if the workpiece temperature is below + 5 °C (+ 41 °F), or the cut edges are to be cold-formed in the course of further processing, preheating to about 150 °C (302 °F) should be considered in the interest of cold cracking resistance.

XAR400耐磨鋼板最好用等離子切割或者激光切割，然而，對于較厚的鋼板，超過了等離子切割的厚度范圍， 可以選用火焰切割切加工割。

XAR400耐磨鋼板火焰切割加工厚度不大于30毫米的鋼板時，一般情況下，不需要預熱處理。 然而當被加工件溫度低于+ 5 °C 時

，或者切割邊在接下來的加工程序需要冷成形加工，則預熱 150 °C 是需要考慮的以避免冷裂發生。

公司的兩大事業部：特鋼銷售部及切割加工部一直致力于向您提供更加優質的產品，多年的專注，成就更專業。http://www.feigekeji.com.cn/show_product.asp?s_id=22